Close

Dry Barrel Sprinklers

VK2793 - Quick Response Ordinary Hazard Dry Horizontal Sidewall Sprinklers (K8.0) View larger

VK2793 - Quick Response Ordinary Hazard Dry Horizontal Sidewall Sprinklers (K8.0)

Viking Quick Response Ordinary Hazard Dry Horizontal Sidewall Sprinklers are thermosensitive spray sprinklers suitable for use in areas subject to freezing. The sprinklers are designed for dry systems and preaction systems where it is necessary to prevent water or condensation from entering the drop nipple before sprinkler operation. They may also be installed in spaces supplied from a wet system in an adjacent heated area.  The large orifice dry sidewall sprinkler allows greater flows at lower pressures than standard orifice sprinklers. The newly desinged deflector carries and expanded approval for installation from 4” to 12” below the ceiling, allowing additional flexibility when installing sprinklers near crown moldings or other obstructions.  Viking Quick Response Ordinary Hazard Dry Horizontal Sidewall Sprinklers are available in various finishes and temperature ratings to meet design requirements. The special Polyester and Electroless Nickel PTFE (ENT) coatings have been investigated for installation in corrosive atmospheres and are cULus listed as corrosion resistant as indicated in the Approval Chart.  Refer to technical data sheet for design and installation requirements.

Note: This product is made to a custom length. Please specify the length by leaving a message upon checkout.

Viking Quick Response Ordinary Hazard Dry Horizontal Sidewall Sprinklers are thermosensitive spray sprinklers suitable for use in areas subject to freezing. The sprinklers are designed for dry systems and preaction systems where it is necessary to prevent water or condensation from entering the drop nipple before sprinkler operation. They may also be installed in spaces supplied from a wet system in an adjacent heated area.  The large orifice dry sidewall sprinkler allows greater flows at lower pressures than standard orifice sprinklers. The newly desinged deflector carries and expanded approval for installation from 4” to 12” below the ceiling, allowing additional flexibility when installing sprinklers near crown moldings or other obstructions.  Viking Quick Response Ordinary Hazard Dry Horizontal Sidewall Sprinklers are available in various finishes and temperature ratings to meet design requirements. The special Polyester and Electroless Nickel PTFE (ENT) coatings have been investigated for installation in corrosive atmospheres and are cULus listed as corrosion resistant as indicated in the Approval Chart.  Refer to technical data sheet for design and installation requirements.

Note: This product is made to a custom length. Please specify the length by leaving a message upon checkout.

  • Send to a friend

    Send to a friend

    VK2793 - Quick Response Ordinary Hazard Dry Horizontal Sidewall Sprinklers (K8.0)

    VK2793 - Quick Response Ordinary Hazard Dry Horizontal Sidewall Sprinklers (K8.0)

    Recipient :

    * Required fields

      or  Cancel

  • 

    Downloads

    TECHNICAL DATA SHEETS
    GUIDE
    REVIT FILES

    Features

    • K Factor: 8.0 (USA) / 11.5 (NZ)
    • Maximum Spacing: Per Standards / Listings
    • Maximum Working Pressure: 175 psi (12 bar)
    • Minimum Spacing: 1.8m
    • Model Number: VK2793
    • Occupancy Type: Light Hazard, Ordinary Hazard
    • Response Type: Quick
    • Thread Size: 1" NPT (25 mm BSP)

    30 other products in the same category

    Close