Flame Detection There are 22 products.

These detectors are sensitive to flickering, low frequency (1 to 15Hz) infra-red (IR) radiation emitted by flames during combustion.

Should the lens become contaminated by a layer of oil, dust, water, vapour or ice, the unit will remain an effective flame detector.The detector has two infra-red (IR) sensors which respond to different infra-red (IR) wavelengths in order to discriminate between flames and spurious sources of radiation. They are ideal for applications where visible light is present.

Applications

• Compressor Stations
• Chemical Plants
• Tunnels
• Waste Recycling
• Nuclear Power Plants
• Engine Rooms
• Spray Booths
• Pharmaceutical Production
• Military & Marine
• Coal Handling
• Printing
• LNG/LPG Production

These detectors have high immunity to false alarms. They are sensitive to flickering, low frequency (1 to 15Hz) infra-red (IR) radiation emitted by flames during combustion. 

They will continue to function under the most difficult of conditions, even if the lens is contaminated by a layer of oil, dust, water, vapour or ice. The detector has three infrared (IR) sensors which respond to different infra-red (IR) wavelengths in order to discriminate between flames and spurious sources of radiation. They are ideal for indoor or outdoor applications.

Applications

These detectors give the highest immunity to false alarms. They are sensitive to flickering, low frequency (1 to 15Hz) infra-red (IR) radiation along with ultra-violet (UV) emitted by flames during combustion.

The detector has a ultra-violet (UV) sensor and two infrared (IR) sensors that respond to different wavelengths from both the ultra-violet (UV) and the infra-red (IR) spectrum. False alarms from flickering sunlight, arc welding and lightning are eliminated by a combination of ultra-violet (UV) and dual infra-red (IR) signal processing techniques.They are ideal for indoor or outdoor applications.

Applications: